Kinugawa Turbo CT26 60-1 for Toyota 3SGTE Celica GT4 ST185 ST205 MR2 Bolt-on

Application
- For TOYOTA 3SGTE / 3S-GTE Celica ST185 / SW20 Series 1/2/3
- 89.9 ~ 93.10 ST185
- 91.10 ~ 92.4 ST185RC
- 94.2 ~ 99.8 ST205
- 89,12 ~ 93,11 SW20 series 1 & 2
- 93,12 ~ 99,8 SW20 series 3
- 1990~1993 Celica ST185 MR2 (1990–~992 Turbo) MR2 (North America 1991~1995)
- 1994~1999 Celica ST205 MR2 (Japan, 1993+ Turbo)
- For TOYOTA 3S-GTE ST185, ST205, and SW20 with CT20B or CT26 twin-scroll turbo.
Because this custom housing is made to bolt to the stock manifold and downpipe, this means you can use your aftermarket downpipe and intercoolers setup as long as they are made to work with the stock CT2x turbo (CT26/CT20b/CT21/CT27/etc.). If you want to swap the outlet of your CT20B 7-bolt turbine housing with that of a CT26 6-bolt, you should either cut or not use an extra stud to ensure compatibility.
- Note: The maximum power stated for each turbocharger has been calculated based strictly on the choke flow of the compressor map (total turbo capability), representing the potential flywheel power. This product's Performance results depend highly on your vehicle’s modifications and tuning/calibration.

- Don't fit generations 4 ST215 & 5 ST246, in which the exhaust housing is cast into the cylinder exhaust manifold, rather than the normal practice of a separate turbine housing after the cylinder exhaust manifold.

Wheels spec
- Compressor wheel: 60/76 mm (for Garrett 60-1 wheel Cast 7+7 type)
- Turbine wheel: 51.9 / 67.9 mm (2 types offered: STD, STS. Click here to learn more about STS technology.)

Compressor Housing
- Bolt-on stock type
    
Turbine Housing
- Bolt-on stock type
- Wastegate: internal gated
 
Bearing Type
- Journal Bearing

Cooling Type
- Oil and water cooling

Actuator Pressure
- 1.0 bar / 14.7 Psi is the default.
- Please add a note or contact us if you need to change to 0.3 bar, 0.5 bar, 0.8 bar, 1.2 bar, 1.5 bar, 1.7 bar, or 2.0 bar actuator.

The Set Includes
- 1 x turbocharger
- 1 x turbine inlet gasket
- 1 x turbine outlet gasket
- 1 x oil feed and return gasket
- 2 x water coolant gasket
- 10 x stud and nut set
- 1 x 20cm vacuum
- 1 x Balance Report with anti-counterfeit tags
[Gen II install kit instruction]

[Gen III install kit instruction]

Situation
- Brand New

Provider
- Kinugawa Turbo Systems
 
Warranty

- For complete peace of mind, Kinugawa Turbo Systems offers a KINUGAWA TROUBLE-FREE WARRANTY for 1 year from the purchase date to the original purchaser. If, for any reason, your turbocharger/s fails or has an issue, you can return it to us for a free overhaul and recondition or replacement depending on availability or the turbo problem. You can be assured that KINUGAWA will cover you no matter the issue.